Forum Activity for @Andrea Bauer

Fruit purée brands

Posted in: Opinion

I have seen the same thing as you with the Boiron flavors. I haven't seen the Sicoly brand you mentioned. I was hoping someone out there had some experience with or an opinion about Perfect Pure (Napa). I am closer to CA so the shipping distance would be shorter. Otherwise, I have ordered for Albert Uster (outside of DC) and have been happy with their pure (caraman brand).I hear you about the shipping. I need to order enough to make overnight shipping worthwhile but not more pure than I can go through before it's no good anymore.I used to make some of my own pures. I found that to be too unreliable for consistency of flavor and the unreliable availability of various fruits where I live. Of course, I have lots of other things to do with my time and buying pures is soooo much easier!Thanks for the feedback.Take care,Andrea

Fruit purée brands

Posted in: Opinion

From my reading of recipes, Boiron appears to be the most widely used brand, but in the U.S. it seems to be somewhat difficult to find, at least for someone buying retail. A Google search reveals widespread availability, but when one checks more carefully, often an online store will have only a few Boiron flavors actually in stock. I've yet to find one that carries anything like the full complement of Boiron products.

I have used Ravifruit (also from France) and found it very good. Sicoly is another widely available brand--it appears to be the primary one with which some companies have replaced Boiron. Since Boiron doesn't have a significantly higher price, I am puzzled as to why suppliers are switching.

The whole question of shipping and quality is another matter, and as a small purchaser of the products, I can only trust overnight delivery to do the best job possible. I try not to think of how the pure got from France to the U.S., then from the seller's warehouse to a U.S. airport, then from Dulles Airport to my little town by truck.

You could, of course, always make your own, though you might have some slight difficulty getting a good supply of passion fruit or yuzu!

Fruit purée brands

Posted in: Opinion

Hi All,I am in need of some fruit pures and am interested to know which brands people prefer. I have a brand I already use but I haven't been going through it as fast as expected and I feel the quantity I need to order is too much. I'd like to hear which brands have great flavors and are as pure as possible (fruit and a minimal amount of sugar if possible). I use them to make fruit-flavored ganaches as well as pates and the occasional jelly (for inclusion in chocolates)Thanks,Andrea
updated by @Andrea B: 04/10/15 04:47:55

How to calculate how much chocolate enrobing for each bonbon?

Posted in: Tech Help, Tips, Tricks, Techniques

Thank you Gordon, I totally understand your method

How to calculate how much chocolate enrobing for each bonbon?

Posted in: Tech Help, Tips, Tricks, Techniques

There is not nearly enough information here to answer your question.

FIRST: What are the dimensions of each piece? Something that is 25mm x 25mm by 5mm is going to take a different amount of chocolate than ones with different dimensions. Also, there is the viscosity and specific density of the chocolate to consider. All of these variables will have an effect on the amount of chocolate used to enrobe each piece.

Because of this, when I have done these exercises I have always worked backwards.

Start off with a known weight of centers, cover (hand dip, enrobe, what/however) them, and then weigh the finished pieces after they are fully crystallized. You probably want to cover 100 pieces to average out small differences. Weigh the finished pieces. Subtract the starting weight from the finished weight to get the amount of chocolate used and then divide y the number of pieces to get the average weight of chocolate on each piece..

How to calculate how much chocolate enrobing for each bonbon?

Posted in: Tech Help, Tips, Tricks, Techniques

Thank you

How to calculate how much chocolate enrobing for each bonbon?

Posted in: Tech Help, Tips, Tricks, Techniques

Well, i reckon there's many ways to do it, and there's lots of variables. if your centers are solid enough for you to handle, why not weigh out 20 of them before and after they've been enrobed to get an average weight? If you're using liquid centers, weigh the dispenser you use for liquid centers before and after dispensing to get the mass of the centers used, then weigh the finished product, and by difference calculate your chocolate use.

If you're asking, on average, what is the normal ratio of chocolate to center that folks use in general - that's pretty large range - i'd say anywhere between 30-70% chocolate

How to calculate how much chocolate enrobing for each bonbon?

Posted in: Tech Help, Tips, Tricks, Techniques

Hi there,

If I make 40 bonbon, how to calculate how much chocolate for each bonbon? in approximately how many (g) chocolate to enrobing for each bonbon? Thank

updated by @him: 04/11/25 09:27:36

Guitar cutter

Posted in: Classifieds ARCHIVE

Alright! I did it. Thanks for all the invaluable info. I bought the dedy from DR.ca. once I looked at the quality of how it was built compared to the plastic based guitar I could really see why it made sense to go with the metal based base. Sure it cost a little more but you get what you pay for.

Thank you all so much for your advice and pointing me in the right direction. I feel I made a purchase I won't regret and have to resell in a short time, thanks to you. All the best!

Guitar cutter

Posted in: Classifieds ARCHIVE

I would advise you to cancel the order you just purchased. Way back when I bought a guitar I bought the guitar with the plastic base. It was so difficult to clean that I sold it after 2 uses and bought the Dedy from Bakedeco .Here is the link http://www.bakedeco.com/detail.asp?id=8883&categoryid=371#.U1PAnMJOX4g . This is the base only. You would need to purchase a frame to match. If you have a 5 mm base you will most likely want a 25mm frame . If you have a 7.5 mm base you will want a 22.5 mm frame.Let us know what you end up with.

Guitar cutter

Posted in: Classifieds ARCHIVE

I'm just checking them out now, looks good. May have to cancel and switch....cheers

Guitar cutter

Posted in: Classifieds ARCHIVE

To little too late - but DR in Montreal handles Dedy.

Guitar cutter

Posted in: Classifieds ARCHIVE

Thanks for the advice Daniel, much appreciated. I just actually found one from Bakedeco (NYC) that I bought, just waiting now for the delivery. It's not metal based but it has three frames and from my research seemed fairly common place. So fingers crossed. I am really looking forward to not having to use a knife anymore! Hopefully it will last me a long time! Cheers and thanks again....Happy Easter!

Guitar cutter

Posted in: Classifieds ARCHIVE

Hello Dirke,

I make my living making chocolate confections and I will tell you that my confectionery guitar is one of my most important pieces of equipment. They are pricey pieces of equipment, but ultimately this tool helps me save money and make money. Several years ago when I was cutting with a knife, I would end up throwing a good amount of chocolate away because the resulting ganache was either too big or too small or funny shaped. Prior to chocolate I spent 10 years cooking in fine dining. I have excellent knife skills; however, cutting ganache is tricky and sticky and it is very hard to cut thousands of pieces into perfect squares. These days, I have very little waste and the guitar helps me produce more chocolate confections in a much shorter amount of time.

If you are looking for a confectionery guitar, I highly recommend the dedy brand from Germany. TCF sales in Texas is a great resource for these. Tom Polk who runs the company is a great guy. I have the base and just 1 frame. It cost me around $2,000 . I am not a fan of the cheaper guitars with a plastic base. They are very hard to clean and the frames that accompany them have a very cheap handle. The Dedy handle makes cutting much better and allows you to distribute your weight on the handle more evenly. The base of the Dedy is metal and it is so much easier to clean. It might be a few hundred more, but you will be glad you spent the extra money. I typically don't see a whole lot of used guitars. I would never sell mine. Whether you buy a used or new guitar, you will be very glad you made the investment! Good luck!!!

Guitar cutter

Posted in: Classifieds ARCHIVE

I am thinking of biting the bullet and buying a guitar cutter, and looking for a supplier in Canada. Anyone know of anyone? or even a used one....

Secondly, any recommendations? Double guitar or single? Pros or cons...do you find you use it enough to justify the cost? I am sure it beats using a knife but just wondering if it's worth it and would love to know your thoughts.

Thanks in advance!

updated by @Dirke Botsford: 04/07/25 13:00:14

Cocoatown Melanger Chocolate tastes like burnt rubber

Posted in: Tech Help, Tips, Tricks, Techniques

We did a couple of batches of chocolate in the machine returned and we could not reproduce the rubber smell. We even tried using the machine in a closed room for 24 hours. We also talked to few of our customers and they do not recall having such a problem. One possibility we can think of is that the recipe you are using may be more viscous than normal and strains the belt.

Cocoatown Melanger Chocolate tastes like burnt rubber

Posted in: Tech Help, Tips, Tricks, Techniques

Clement,

As I understand it, that is true of the older machines, but they upgraded the factory belts on the Cocoatowns a while back. So, I dont not think it is the belt.

I actually sent the machine back to Cocoatown when I first received it, because it was giving off such a strong odor. They did extensive tests and said it was running fine, however it is really altering the flavor of the chocolate.

Thanks so much for your input,

Jessica

Cocoatown Melanger Chocolate tastes like burnt rubber

Posted in: Tech Help, Tips, Tricks, Techniques

Not too familiar with Cocoatown machines, but you may need to tighten the belt. Ben Rasmusen of Ptomac Chocolate recommends changing rubber belts to fiberglass. Take a look at his site or DIY on this blog. Good luck !!!

Cocoatown Melanger Chocolate tastes like burnt rubber

Posted in: Tech Help, Tips, Tricks, Techniques

Im using the recipe that I normally use in my new Melanger. Im having serious issues. Melanger chocolate tastes like burnt rubber after a few hours in the new machine.

Has anyone experienced this? Is this just because its new?

updated by @jessica@graciaschocolate.com: 04/11/25 09:27:36

I just wanted to show my new website and get some feedback!

Posted in: Allow Me to Introduce Myself

Hello Steven, as I see the page was created on www.wix.com platform which is pretty good when you have no web design/programming knowledge and would like to have an acceptable website. As an advice I would recommend you to spend a few more dollars (maybe later when business grows up) to a web designer who will be able to develop a better site and also make it responsive, which means that will show the content the same way in virtually any device, no matter how big/small is the user's screen size.

Hope you take this just as a friendly advice, and if you need any help finding a good designer, I know a couple here in Dominican Republic that could help you with that, or also you can go to www.freelancer.com and hire any person for an affordable amount.

I just wanted to show my new website and get some feedback!

Posted in: Allow Me to Introduce Myself

Wow! Thank you so much. That is a really solid find.

Fixing now!

I just wanted to show my new website and get some feedback!

Posted in: Allow Me to Introduce Myself

Nice photos and a good explanation of your chocolate making process.

You have very pretty and enticing packaging. Good choice!

A small correction-- typo- on the Grinding/ Conching page ( http://www.stonegrindz.com/# !grinding/c1l7b) "loscious" should be luscious"

I just wanted to show my new website and get some feedback!

Posted in: Allow Me to Introduce Myself

Your website is very nice. I especially love your candy bar wrappers. They are too nice to open.

I just wanted to show my new website and get some feedback!

Posted in: Allow Me to Introduce Myself

I see no flaws. I like the site very much. Kinda jumps at you, and gets to the point: 'We are real good at what we do'!

Congratulations !!!

I just wanted to show my new website and get some feedback!

Posted in: Allow Me to Introduce Myself

Looks great! Love the rolling hi-res pictures. You should consider accepting bitcoin as payment. Bitcoin payments can be done a processor like Bitpay ( https://bitpay.com ). You actually never touch the digital currency, the processor deposits next day in your local currency. A lot cheaper that Paypal or any other CC processor and no chargebacks. You just insert your business to a new and flourishing economy, with, quite possibly, zero risk.

I just wanted to show my new website and get some feedback!

Posted in: Allow Me to Introduce Myself

Check it all out now!! I figured out how to just do edits on the mobile page specifically!!

I just wanted to show my new website and get some feedback!

Posted in: Allow Me to Introduce Myself

Yeah the $7 symbols I created in photoshop and they look really nice on the computer but when it is on the phone it puts them at the bottom, I used them to cover the small $7.00 that the site automatically puts for the price of the item. Thank you for pointing that out, I will have to check that out and figure out if there is a way to separate the two so it doesn't do that.

And I will narrow the box that has the reviews of our chocolate in it! Thank you so much for being so detailed I seriously appreciate it.

I just wanted to show my new website and get some feedback!

Posted in: Allow Me to Introduce Myself

Only one photo attached last time.

I just wanted to show my new website and get some feedback!

Posted in: Allow Me to Introduce Myself

I checked your site out on my iPhone. The home page is nice. It was difficult to get to where I could buy something.
The reviews aren't spaced right for the phone width. I would make the review box a touch more narrow.
On the page with the bars there were a bunch of $7 or $6. What is that about? They weren't linked. It was wierd.
I like your descriptions.

The blog was odd that it repeated the posts.
Thanks for sharing.
Please take a look at my screenshots.
Larry

I just wanted to show my new website and get some feedback!

Posted in: Allow Me to Introduce Myself

Just uploaded my new website! I wanted to get some feedback on what you all think of it!

The url is www.stonegrindz.com

We have been working really hard on updating this, so be critical.

Thank you so much!!

updated by @Steven Shipler: 04/12/15 13:09:02

What are the meterials of the chocolatier?

Posted in: Chocolate Education

Okay,

Thanks Omar!

What are the meterials of the chocolatier?

Posted in: Chocolate Education

As a beginner you would want to start using premade chocolate.Simply because your chocolate consumption in the beginning (assuming you will be opening a chocolate shop) will not be as high.

To make chocolate with raw materials you will need a machine to cook your recipe, which involves high cost in buying, maintaining the machine, energy bill etc...

What are the meterials of the chocolatier?

Posted in: Chocolate Education

Thanks Omar,

My question was about making chocolate from premade chocolate vs creating from raw materials, sorry I wasn't clear.

What do most of the chocolatiers use? What is considered "better"? Making chocolate from raw materials like cocoa liquor + butter + sugar... etc, or using premade chocolate likeValrhona, Callebaut, etc? I am not sure what should I choose as abeginner chocolatier.

What are the meterials of the chocolatier?

Posted in: Chocolate Education

I would taste and decide based on that.they all have a wide range of products.It all depends on your customers, what they like and how much they are willing to pay. We cannot really generalize and say callebaut is better than Belcolade for example, the dark chocolate might be better at Belcolade where milk might be better at Callebaut. It is also important to make sure the brand you choose is available in your area.Check with suppliers and compare prices. Good luck!

What are the meterials of the chocolatier?

Posted in: Chocolate Education

Thanks Omar,

I am still not sure what should I use. What most of the people who make pralines and chocolate bars use? What is considered "better"?

What are the meterials of the chocolatier?

Posted in: Chocolate Education

Hi there,

There are chocolate makers and chocolate "fondeurs" Chocolate makers produce their own chocolate recipe.it can either be from bean to bar or by mixing raw ingredients (cocoa mass,butter,sugar etc..) while "fondeurs" buy the chocolate from the list you mentioned, melt it and work their magic.

What are the meterials of the chocolatier?

Posted in: Chocolate Education

Hi,

I am starting to learn the art of making chocolate.
I have a basic question - do chocolatiers worldwide make their chocolates from cocoa butter + cocoa mass + vanilla, or they use premade chocolate like Valrhona, Callebaut, etc?

Thanks

Or M

updated by @Or M: 04/10/15 03:49:34

800 gr. half an easter egg :D

Posted in: Tasting Notes

updated by @Dario M. Agesilao: 04/10/15 14:45:47

Cutting marshmallows

Posted in: Tech Help, Tips, Tricks, Techniques

I would consider enrobing with chocolate twice. first time before cutting and second after. The chocolate creates a thin layer making it easier to cut. Otherwise, your marshmallow recipe might need to be firmer.(more gelatin perhaps)

Cutting marshmallows

Posted in: Tech Help, Tips, Tricks, Techniques

We picked up a Chicago Metallic Marshmallow Cutting Wheel and it is fantastic. a light spray with oil/butter and away you go.

$10 well spent.

The blade is plastic and perforated.

http://www.amazon.com/Metallic-Marshmallow-Collection-Perforated-Non-Stick/dp/B00FVFQ46S

Cutting marshmallows

Posted in: Tech Help, Tips, Tricks, Techniques

My friend also used a pizza wheel - but she was very picky about which ones she purchased - some worked well depending on the blade/handle configuration, others more poorly.

Cutting marshmallows

Posted in: Tech Help, Tips, Tricks, Techniques

The problem we have is that the middle is very sticky and using the pizza cutter or a knife works for a cut or two. Then you need to wash off whatever your using. The part we coat in cornstarch and confec sugar is no problem. We appreciate the help from everyone!