Forum Activity for @RegardsSent

Hello in California!  I sent an email and left a message on your provided phone number.  I am looking forward to hearing from you!

Thanks-

The Clima is good option when you need to balance throughput with available space. The Clima is not cheap when compared with some DIY solutions, but it requires very little space (comparatively) and it's easy to put molds onto the Clima input belt without having to move from the depositor so in that respect it's quite labor efficient. At roughly 3.5 molds/minute (timing can be adjusted to increase/decrease time in the tunnel based on cavity thickness) the cooling time is about 13 minutes. We have success cooling 100gr bars in molds with 3 cavities at this speed.

You can find a downloadable US/60Hz catalog page here . Pricing may change in January, so prices are guideline only (as it's December 30 and there's no time to place an order before Jan 1).

Aloha.. wondering what is still available.. I'm on Maui and starting up.. looking for a tempering machine primarily and possibly other equipment and supplies.

mahalo,

jessica 

I am thinking of enrobers. I am not far from the starting line in my research and experience with these type of machines.  There seems to be a pattern or perhaps even a consensus that generally European brands (Italian, German) appear to have the better equipment.  I don't know about customer service but I hope that having a US market for their goods would logically require ongoing positive support. If the equipment is of high quality and reliability the good news should be that customer service will not be used as much.  

What equipment is of interest to you traveling in the opposite direction?

Being in Europe myself I would be curious to know what machines you are considering worthy of being shipped in comparison to machine being fabricated in the US?  As I am also looking at doing the opposite.

Still available?

Pics and location of the display case?

Update - we got our temperature under control, still using a makeshift cooling tunnel (covered speed rack, perforated sheet pans, AC unit) with good results. We are producing approx 25 molds at a time, but plan to bump that to 50 as soon as we get our electricity sorted in this building. I'm planning our expansion to another workshop, and getting opinions on machinery - the FBM Clima 50 is looking mighty nice to me. Clay, any thoughts on that? 

I'm having a hard time sending a PM, but I am also interested in the bar molds. Assuming 6 squares of 9 pieces? 

I am interested in the two mah jong molds. I already have a set of the chinese coins. I can do a postal money order or EFT, whatever is best. 

PM Sent about bar molds and square molds. 

Brian

The major change I've seen is that the US$ is now stronger than the €uro. Otherwise, prices are fairly stable. Ocean shipping costs can vary depending on the cost of fuel and differences in cost structures between shipping companies.

I am wondering if prices have come down or show any type of pattern on importing machines applicable to 

our chocolate businesses?  Anyone had recent experiences or observations?  Are there sources one can be confident in to

check this out?

well, there are two molds, I can email you pictures if you like, I also have two molds of the chinese coins.  shipping via cdn post is no problem, best payment option would be cdn pistal money order.

Hi there. I'm interested in your Mah Jong sets. Am located in Calgary. Please advise.

I'll take the panning attachment if you can get it to me at 94608 in California. Drop me a line at me@brianwallace.com if it is still available. 

PS - Clay typically encourages using the Private Notes feature, rather than posting your email address for spammers, though we have to Follow one another to send said notes, so give me (and any others) a Follow if you'd prefer to negotiate on the site.

Hi foodpump! Two Q's: What's your email address? Do you ship to the US? 

I'm interested in the following molds: magnetic hearts (both the hollow and the transfer style), the mahjong, the cigars, the santa molds, and the standing/sitting bunny molds.

Thanks!

Chris

I've signed on as "foodpump", and am your newest member.  From 2007 to 2016 I ran a small chocolate and pastry shop in Vancouver, and in the last five years specialised in bars, over 24 varieties for the retail sector.  I'm currently working for a catering company as pastry chef.  

My background is culinary, having started with a cook's 3 year apprenticeship in Switzerland back in the '80's, and worked as a cook andblater chef in Switzerland, Singapore, and Vancouver.

the pictures dont match the descriptions  in the order I listed them in....

oh well, back to the descriptions,

christmas garnish plaque, two of them, file too large

baby santas, two molds

modified calkebaut santa molds, $10.00 for both

easter half eggs

ballerina bunny, file too large

farmer bunny, file too large

standing bunny with basket file too large

sitting bunny, file too large

giant 22" santa

I guess you can email me for better pictures

Edward

 20161227_190956.jpg - 1.5MB

all of these molds are polycarbonate, $10.00 cdn each

first we have 24 of the bar molds, 6cavities @50gr

mmm, file too large...no picture

next we have bark molds, 10of them, two cavities @100gr.  that picture worked

then two bar molds, the large one is 250gr

flat maple leaf, 9 molds mmm... file too large

small maple leaf, 3molds

love bars, 2molds, file too large

xmas psent bon bon, two molds

dolphin and assorted seafood  molds, one each

seashell molds, two of them, file too large

golf ball molds, two of them, file too large

squirrel mold, two sides, file too large

hedge hogs, 2@12 cavities, 2@18 cavities

happy b day/happy anniversary paques one only, file too large

crown bon bon, four of these, file too large

star bon bon, stippled bottom, two of these

magnetic heart, nice shape, $15.00 each, two of them

chinese coins, 5-7 gr each, three of tnese

magnetic coins.these have misding magnets and most magnets epixied back in, $5.00 each, two of them, file too large

geometric domes, two of these

halloween garnishes, one of them only

mah jong bon bon, two of them

roses, large ones, two of them, file to large

pyramid bon bon, two of them

lips, one only, file too large

hinged magnetic hollow heart, one only

cigars, two halves

flat hearts, three molds

large plain hearts, two molds, file too large

embossed hearts, two molds

heart lolli, two molds, file too large

smal plain heart, nine of these molds, file too large

I think i'll split this post in two parts

 20161227_183012.jpg - 2MB

hi all, I had a local buyer take the vibrator, and will pick up the melters and wheel on Wednesday. Panning attatchment is still available, but will need a postal(zip code) code to calculate shipping cost.

I have a lot of mold pictures to post, and will do in a separate listing tonight.

I

Hi there,

 We have a number of different beans we are selling for a great price. These are all great beans that have been cleaned already. 

$3.00 a lb

Guatamala Lachua - 430 Lbs

Hondorus La Masica - 125 lbs

$2.50 a Lb

Peru Oro Verde - 100 lbs

Nicaragua Momotombo - 80lbs

------------

Please inquire via Email or Phone   -   info@starchildchocolate.com / 1-707-671-5778

- See more at: https://www.thechocolatelife.com/community/forums/classifieds/17434/f-s-rev-delta-and-chocolate-skimmer#sthash.vwDYdPoJ.dpuf

Hi there,

We are changing directions a bit and are trying to sell a few different pieces of equipment...  

-----------

FBM Unica continuous tempering machine...

25kg working bowl capacity with full craft chocolate upgrade. This is a great machine that we would love to keep if we could. 

It is two years old and was minimally used for one of them. It is in excellent condition and a great buy for anyone ready to upgrade to one of the best machines in the industry.  

New this machine was available for 24k we are asking 18k obo.

-----------

We also have a Kent three roll mill

This mill has 9" x 24" rolls and can grind down quite a bit of chocolate fast. . This machine is not ready for chocolate just yet but with very little work it can be. We got a great deal on it and changed directions before we got it grinding. Willing to pass the same deal onto some one that wants it. 13k  

________

We have a number of other craft chocolate making items for sale as well... 

Please inquire via Email or Phone   -   info@starchildchocolate.com / 1-707-671-5778

- See more at: https://www.thechocolatelife.com/community/forums/classifieds/17434/f-s-rev-delta-and-chocolate-skimmer#sthash.vwDYdPoJ.dpuf

 Unica.jpg - 50KB

Hi there if you are still interested it instill available.

I'm interested in the panning attachment, would you ship to US? 

I'm also interested in your vibe table, and am curious about which shapes your plaques are. Are they CW plaques? Located in Calgary.

I  will get some pictures  of the molds up by monday.

Can you email me the images of the molds? At sehgalbalpreet@gmail.com 

Greetings! 

I am looking to buy a used Perfect Air 2.0 Wheel Tempering machine.  I have scoured all of the listings online that I could think of and have come up empty handed.  Does anyone happen to have one that they are no longer using/looking to part with?  Thanks!

Pics and descriptions of the molds?

@paul2 @brian-mikiten Thank you both!  I will check out the websites

some equipment for sale.  All of the listed equipment is D+R (design and realiasation, Montreal) brand and in good working order.

two 20 kg melters, waterbath style.  Each comes with a dedicated trolley with double locking castors, and extra hotel pans.

each $800.

one tempering wheel.  Fits in a 20 kg melter.  comes with a custom plexi glass cover to fit over the wheel and melter.

  $800

one tabletop mold vibrator.  This has been customized with a foot pedal switch for hands free operation, but can easily be reconfigured again

$600

(no picture) panning bowl, to fit on a kitchenaid mixer  $250

You can check out www.dr.ca for more descriptions of the equipment.  The company is still in business and still producing the same equipment.

I also have aprox 100polycarbonate molds,  polycarbonate seasonal figures (22"giant santa, etc) and well over .200 thermoformed molds

all items are located in Vancouver, b.c.  Please contact me to arrange a time to view the equipment.

 20161205_093920.jpg - 1.7MB

Is this still for sale?  Please contact at mizzouliana@gmail.com

If you are interested, make an offer.  Need to sell asap

Hi! I'm also interested if it's still available. Please email me at acchocolateco@gmail.com. Thanks!

Hi Adam, I am interested also if it's still in negotiation. My email address is elisia@raphiochocolate.com. Thanks. 

2004 240# Hilliard Tempering Machine with Chain Attachment.  Works great. 

$4200

 Tempering Machine1.png - 214KB

is this machine still availlable by any chance??

Hello Clay,

New member here.  I would appreciate being put in contact with the FBM rep in Texas as well. 

Thank you

Hello,

Have  you sold your Bakon  tempering Equipment?  If not I would be interested in photos and details.

Thank you