I have the Sinsation. It melts and tempers about 1.5 lbs. of chocolate at a time. After about 30-40 minutes I find that I need to melt a small amount of chocolate and re temper the batch because it becomes over-tempered, becoming too thick to work with. Any suggestions?

Hi Clay.

I actually did contact Chocovision and based on what I told them the thingy that warms the machine is kaput! So I am sending the machine for them to fix it.

Thank you, Clay. It is nice to be back in the chocolate-making mood. I hope you are well.

Andre -

You've done all the right things, except I would call Chocovision and see what they can do for you. There are some electronics in your Rev 1 and it's possible, after a long period of inactivity, that something worked the first time when it was plugged back in, but then stopped working.

--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@DiscoverChoc

Good morning, everyone. I hope you are all well.

I had not used my Rev 1 in a couple of years. Last Saturday I took it out and made a few batches of molded chocolate and the machine worked perfectly.

This Saturday it did not! Everything did what they were supposed to do, but the temperature did not kick in and the machine did not melt the chocolate - so, no tempering.

The bowl was spinning, all the lights were on...everything looked fine, just the temperature wasnt working. I unplugged the machine, reset it...and nothing.

I emailed Revolation and am waiting for a reply. In the meantime, has anyone gone through something similar that could shine a light on what may be going on?

Thank you.

updated by @andre-costa: 04/11/25 09:27:36